Features

Quickly and reliably detects all kinds of RF listening devices, including analog, digital, constantly existing and intermittent, sending audio or video, with or without encryption
Finds hidden surveillance devices employing the digital standards GSM, 3G, 4G/LTE, 5G(<6GHz) Bluetooth, Wi-Fi, DECT, etc.
Detects illegal information transmission in AC, telephone, Ethernet, alarm and other wires as well as in the infrared range with the help of the supplied Multifunction Probe
Can work in instant detection mode, guarding mode, locating mode and car tracker detection
Has a 20-50 times higher sensitivity and detection distance compared to conventional RF detectors and near-field receivers
Real-time spectrum analysis gives the ability to detect short-burst signals such as Wi-Fi, Bluetooth or mobile devices within just a few seconds
Automatic antenna selection provides high sensitivity and detection distance on all frequency bands
Can monitor the RF environment 24 hours a day with data logging
Capable of detecting covert bugging devices with an accumulation function and transmitters hidden within the spectrums of other signals
Supports storage of an unlimited quantity of signals. Full information is stored in the log and can be reviewed during the detection, or at a later time. Multiple logs are supported.
Demodulation of audio in FM, AM, USB, LSB, CW (adjustable BW 3…240 kHz)
Alarm relay output can activate external devices when a dangerous signal is detected (turn on a CCTV system, for example)
Powered from the laptop’s or tablet’s USB

Features of the new generation

New portable design – the device is reliably mated with the laptop or tablet and moved during the detecting and locating process
The laptop or tablet is attached with the help of the magnetic holders
Side handles are used for carrying
All antennas are fixed to the main unit
Carrying case is in the supplied set

Advantages

✦	What it is: a portable system controlled by a laptop computer or tablet
	The high capacity of a laptop’s hard drive enables full data logging during the detection (24/7 possible) Wider screen is more convenient for analysis Compatible with touch screens Magnetic holders provide reliable attachment of the laptop/tablet to the unit while the side handles make it easy to carry the entire system

✦	Handling of the mobile and wireless bands GSM, CDMA, 3G, 4G/LTE, 5G(<6GHz), DECT, Wi-Fi, Bluetooth, etc.
	Mobile and wireless signals are detected simultaneously with analog transmissions Mobile/wireless signals are detected with the use of individual thresholds and are displayed separately from other signals Activities within each band are stored as one signal with a certain danger level to avoid excessive records in the Signals table and to locate the sources with a hopping frequency Additional sweepings on the ‘short-burst’ bands are performed to increase the probability of interception of such signals as GSM, 3G, 4G, 5G(<6GHz), DECT, Wi-Fi, Bluetooth, etc. External interference from neighboring mobile phones and Wi-Fi routers can be rejected with the help of the thresholds The supplied data files allow the operator to adjust the system to the mobile/wireless bands employed in the country of use

✦	Sensitivity and detection distance
	The built-in spectrum analyzer has 20-50 times higher sensitivity and detection distance compared to conventional RF detectors and near-field receivers Resistant to interference – sensitivity remains high regardless of the proximity to wireless routers, cordless phones, mobile phones, TV towers, radio broadcasting and mobile communications

✦	Support of the ‘Known signals’ table
	The operator can easily distinguish between safe and dangerous signals The TV frequencies employed in the country of use can be quickly imported from the supplied data files The FM, VHF/UHF police and municipal channels can be collected and stored for further use

✦	Advanced signal recognition method
	The signals are automatically recognized in the spectrum traces and inserted or updated in the Signals table Both analogue and digital signals are captured with an assigning of a corresponding Danger level

✦	Unique algorithm of measuring the signal’s Danger level
	Uses a combination of the reference trace and individual thresholds for mobile/wireless bands Takes into consideration both the signal’s strength and bandwidth Works for both analogue and digital signals including transmissions with a changing frequency Is used during the locating procedure and provides more reliable results compared to the traditional ‘signal strength’ method

✦	Low demands on the operator’s level of knowledge
	The system can be prepared for detection with the help of the ‘Update Masks’ procedure within a few minutes Manual handing of spectrum traces is not necessary Everything is done automatically after the detection starts The operator is warned by an audio alarm when a dangerous signal is detected

✦	Data logging
	All the spectrum traces and alarms are logged during detection The situation at any given time can be reviewed and studied 24 hours a day logging provides detection of periodically working/remotely controlled bugging devices

✦	Tracking of the signal’s activity
	The full history of each separate signal, or of all signals simultaneously, is displayed on the Alarms graph The events at any given time can be reviewed by simply clicking on the graph The operator can see the duration of an activity and as such distinguish between any interference and real danger

✦	The Waterfall and Persistence graphs
	Both the present and previous measurements at any given time can be displayed The displayed time interval (density) is selectable in the range of 2 minutes to 6 hours

✦	Car Tracker Detector mode
	The monitoring of mobile bands can detect signals from GPS trackers hidden within a vehicle

Specification

Frequency range	9 kHz – 12GHz
Update rate	3GHz-4GHz/sec
Reaction time (How quickly a dangerous signal is detected)	3 — 4 sec
Format	Handheld unit
Probe input	PROBE
Occupied disk space per 24 hours	<24 Gb
Unit dimensions (without antennas)	33.5x26x6 cm
Unit weight (without laptop/tablet)	3.4 kg
Spectrum resolution	9.8 kHz
Temperature Range	0°C to +55°C
Demands on laptop/tablet (not included in the supplied set)	Intel Core i3 / AMD Ryzen 3 or higher (Intel Core i5 / AMD Ryzen 5 recommended) 1 x USB 3.0/3.1/3.2 (or USB Type C) 1 x USB 2.0 (or USB Type C) RAM 8 Gb or more SSD 128 Gb or more Windows 7, 8, 10 or newer Screen 12-14″
Displayed dynamic range	–90…–10 dBm
Displayed spectrum spans	0,5, 1, 2, 5, 10, 25, 50, 100, 200, 500, 1000, 2000, 3000, 6000 MHz
Spectrum graphs	Spectrogram, Waterfall
Spectrogram’s displayed data	Persistence, Live, Max, Threshold
Detector’s modes	Wide-Range, Signal, Selection
Updated spectrum span	RF Sweep, Guard 24/7: broadband Signal Analyzer: displayed, selected, real-time Car Tracker Detector: mobile bands
Fields of ‘Signals’ table	Frequency, Bandwidth, Name, dbm Level, dbm Peak Level, Danger Level, Peak Danger Level
Fields of ‘Bands’ table	Begin, End, Name, Type, Threshold, Priority, Tracker detection
Fields of ‘Known Signals’ table	Frequency, BW, Name, Modulation

Supplied set

Main unit with the built-in spectrum analyzer and RF switcher	1
Carry case	1
Software Delta X on a USB drive	1
ODA-4 – omnidirectional wideband antenna with screw and 20 cm cable	1
MWA-6 – microwave antenna with screw and 20 cm cable	1
LPDA-12 – microwave antenna	1
Multifunction Probe with cables (high-voltage cable, low-voltage cable, 2 m coaxial cable)	1
In-line modular adapter	1
Set of accessories (USB Type C to USB Type A adapter – 2, angle USB adapter – 2, magnetic stickers for laptop/tablet – 4)	1

Downloads

Software Breeze RF 1.0 (64 bit) Documents Delta X, Delta S with Breeze RF User Manual Old Software Software Delta X 1.2 x64 (64 bit) Software Delta X 1.2 x86 (32 bit) User Manual G2 Brochure and Specification

Delta X G2/12

Features

Features of the new generation

Advantages

Specification

Supplied set

Downloads

Video